fbpx

Tips to Repair Mercedes Transmission Leaks from the Best Automobile Repair Shop in Tucson

Mercedes Transmission Leaks

Tips to Repair Mercedes Transmission Leaks from the Best Automobile Repair Shop in Tucson

If you know anything about leaks, you know that even the smallest leak results in complete drainage of the tank in a short amount of time. When the leak is in an automobile, the danger factor is extremely high. This issue needs to be addressed as soon as possible.

In luxurious cars such as Mercedes, keeping the transmission functioning well is not only essential for safety but also for enjoying a nice ride in a nice car. A transmission leak, however, can quickly cause the transmission to fail, so it is a problem that needs immediate attention. In this article, we will discuss transmission leaks and how to deal with them to stay safe on the road.

What is a transmission leak?

Transmission leaks are breaks in the transmission system which cause the transmission fluid to escape. Transmission fluid is a red or green liquid that acts as a coolant for the transmission. This fluid allows smooth shifting of gears.

When the transmission fluid leaks out, it can be easy to detect because it leaves a red or green pool under the vehicle. The more difficult part, however, is identifying the source of the leak. There are many parts to the transmission system, including the gasket, transmission pan, or seals, to name a few.

Causes of Transmission Leaks

Transmission leaks may be caused by a number of reasons, but they usually arise due to excessive heat and vibrations. These natural mechanical breakdowns wear down the seals and causes gaps to form.

In some cases, small rocks and other debris on the road can fly up under the vehicle and damage the transmission system. You may be very aware of any damage if you are driving in a rocky area or where road repair is occuring. In this case, you can take your car to a professional Mercedes repair shop relatively quickly for an inspection of your transmission.

Problems Associated with Transmission Leaks

Once a transmission leak occurs, a transmission failure is bound to ensue. Since the transmission leak slowly but steadily depletes the transmission fluid, there will eventually be no coolant left to keep the transmission functioning smoothly. This results in problems with gear shifting and therefore will cause the vehicle to lock in a gear.

Even before total transmission failure occurs, the leak will cause the transmission to not work properly since it is unable to cool fast enough. The gears may lock up and not shift smoothly, causing the vehicle to shake and rock severely upon accelerating. Needless to say, these rough movements may be very uncomfortable and may also lead to other problems in the vehicle as well, increasing the rate of transmission fluid leakage.

Dealing with Transmission Leaks

Although the presence of a transmission leak may be easy to detect, the specific location of the leak is much more difficult to find. Also, finding the leak is not easy because it requires cranking the vehicle up and inspecting underneath it to examine the transmission.

Sometimes, the leak may be occurring from inside the transmission, requiring one to open the hood and inspect each of the many parts of the transmission system, each of which may be contributing to the leak. For example, the leak could potentially occur in the transmission fluid lines, torque converter, pan gasket, transmission pan, or any of the seals that keep them locked up securely.

Since this process is not only difficult and dangerous, but also requires a lot of expertise, it is highly recommended to consult a professional. With something so intricate and important as your Mercedes’ transmission, there is no reason to risk further damage to your vehicle by making this a DIY project.

The Solution to Transmission Leaks

Given the severity of transmission leaks, it is imperative to get them Mercedes Transmission Leaks Checkchecked out as soon as they happen. Not only is fixing a small leak much easier than a big one, but getting it fixed earlier will minimize potential damage to other parts of the vehicle as well. The leak will need to be corrected before complete transmission failure occurs, so it is much better to get it fixed earlier rather than later.

If you think you have a transmission leak and want to get it examined, visit Group One Motorwerks in Tucson, AZ, where we provide the professional experience from trusted specialists. We are all you need for your Mercedes vehicle needs.

BMW Clutch

Methods to Repair Your BMW’s Clutch From Expert Technicians in Tucson

Driving a BMW is a luxury. They are vehicles that set very high standards. When you own a BMW, you know that it will be of top quality and last for a very long time, as long as the proper maintenance and repairs are kept up. One part of your BMW that plays a huge role is the clutch. Below you will find information on what the clutch is and how to repair it if you need to.

What does the clutch do?

If your BMW is automatic, then one of the most important parts of your vehicle is the clutch. In order for you to successfully drive your automatic BMW, you have to have a clutch that is working properly.

The clutch is the mechanism that communicates between the engine and the wheels. The clutch tells the engine and the wheels when it is time to engage with each other and disengage from each other. In order for your BMW to shift into the next gear, the engine rotation has to be disconnected from the wheel rotation and the clutch is the part that allows this to happen.

In order for the clutch to function properly, there are many different nuts, bolts, and screws that all have to work together. The 4 main parts that make up the clutch that you should be aware of are the throw-out clutch bearing, clutch disk, flywheel, and the pressure plate.

Signs the Clutch is Failing

The clutch in your BMW is crucial if you are going to keep driving. Over time, it is possible that the clutch can wear out. There are certain signs and symptoms that you should be aware of that will indicate to you that the clutch is starting to fail.

The first sign is going to be a grinding or squeaking noise. You will hear the grinding noise as you are attempting the shift gears. The squeaking noise comes from the pedal. As you engage the pedal, if it squeaks, then you will know that there is an issue with the clutch.

In addition to the pedal squeaking, the pedal can also begin to feel different. This could mean anything from the pedal vibrating to the pedal sticking to the pedal feeling loose. Any one of these will alert you to the fact that there is an issue with the clutch.

Another sign that you should be aware of that will indicate to you that there is an issue with the clutch is if the gears are slipping or if you are having trouble shifting. Both of these signs are very common in BMWs, especially as the vehicle ages. Once you become aware of this sign, it is extremely important to repair the clutch yourself or take your BMW in for servicing immediately because this can cause damage to the transmission and the engine.

How to Repair the Clutch

If you are handy with tools and need to replace the clutch due to one of the issues previously mentioned, then the following steps will walk through how to do it.

  • Make sure your BMW is in a secure position. This will keep you safe as you are working on it. Then you can properly lift your BMW with a jack to hold it in place.
  • In order to get to the clutch, you need to remove the transaxle. To make it easier for you to remove, then disconnect the clutch cable and also the positive battery cable because these cables will be slightly blocking the transaxle.
  • Unbolt the engine mount because you will need to remove at least one of the engine mounts in order to completely remove the transaxle. The transaxle can be removed by unbolting the flywheel housing and then gently pulling it away from the engine.
  • After the transaxle is out, you will be able to take the clutch out by unbolting the pressure plate. It is here that you will also want to thoroughly inspect the flywheel to ensure there are no hot spots and make sure it is clear of all grime and debris.
  • Replace the flywheel and then put in the new clutch.
  • Reinstall the transaxle and slowly release your BMW from the jack.
  • The last step is to test the clutch to ensure that any and all issues have been repaired.

Servicing Your BMW for Clutch Issues

Changing the clutch on your own can be a difficult job if you BMW Clutch Replacement are not familiar with all the parts. If there is a hint of doubt, then you will want to bring your BMW in for servicing at Group One Motorwerks. We are located in Tucson, AZ.

We will run a thorough diagnostic on your BMW to locate the exact part that is causing your clutch to need to be repaired. Our trained technicians will then go over with you what they recommend, and upon your approval, the clutch will be repaired using the best and newest parts without you having to pay dealership prices for them. We will always make sure that you leave our shop satisfied and with a completely fixed clutch.

Call Now!